iBasso DC05 DC04 Type-C to 3.5 4.4mm Headphone Amplifier Adapter USB DAC HiFi HiRes Cable vs xiaomi shanling fiio | Электроника

iBasso DC05 DC04 Type-C to 3.5 4.4mm Headphone Amplifier Adapter USB DAC HiFi HiRes Cable vs xiaomi shanling fiio | Электроника

ibasso DC05 mobile phone decoding headphone amplifier line HIFI decoder portable small tail

Parameter index:
DAC chip: ES9219C*2
Maximum output level: 2Vrms (3002 Load), power is about 13mW
Maximum non-distortion level: 1.73Vrms (32Q2 Load), power is about 93mW
Maximum undistortion level: 1.5Vrms (16Q2 Load), power is about 140mW
Noise floor: 1 55pVrms
SNR: 121dB
THD+N: -105dBA (32Q2 load)
Output impedance: <0.5Q2
PCM: support 32bit/384kHz
DSD: Native DSD64, DSD128, DSD256
MQA: Support 16X expansion
Weight: about 9g
Length: Approximately 105mm

Operation introduction:

DC05 can be plugged and played on Android devices above Android5.1 ( compatibility differences may
exist on very few Android devices due to device system or hardware impact ).

Since the DC 05 output level is up to 2Vms, even if the volume is 1 on some Android devices,
the volume may be very high. Therefore, it is recommended that you install exclusive
Android apk-1 iBasso UAC for more detailed volume adjustment.

Some models of Android
devices may need to manually turn on OTGS in system Settings.

With the use
of mobile phones, the highest support PCM32bit/384kHz and Native DSD256 output.

Packaging accessories:

DC05, USB-C to USB-A adapter, simple instructions

Parameter indicators:

DAC chip: ES 9219 C * 2

Maximum output level: 2Vrms ( 3002 Load ), power about 13mW

Maximum undistorted level: 1.73 Vrms ( 32Q2 Load ), power about 93mW

Maximum undistorted level: 1.5Vrms ( 16Q2 Load ), power about 140mW

Bottom noise: 1.55 uVrms

SNR: 121dB
THD + N: -105 dBA ( 320load )

Output impedance: < 0.50

PCM: support 32bit / 384kHz

DSD: native DSD 64, DSD 128, DSD 256

MQA: support 16X expansion

Weight: about 9g

Length: about 105mm

NDK femtosecond oscillator
The voice does not hesitate to use materials
DCO5 is equipped with Japanese NDK-femtosecond crystal oscillator, which is of pioneering significance in decoding
line, can effectively reduce phase noise, and provides more accurate clock reference for DACs.

MQA hard solution supports 16X expansion
MQAs can provide high resolution playback at low data rates, solving the
problem that high-resolution audio files are too large when streaming media. With
Tidal and other mqa-supporting playback software, DC05 can realize MQA 16X expansion.

Where 2X is expanded by software (unfolding), 8X is rendered by DAC hardware (Hardware rendering).

No cumbersome Settings,
just apps and audio files support, plug and play, convenient and fast.

Continues dual DAC architecture
Exert ES 9219 C amazing potential
In the field of hi-fi, the improvement of indicators means more research and development time and material
cost. In the small tail with friendly price -- one DC05., we have never compromised half a point.
we strictly follow the principle of sound quality and performance first, and adopt dual DAC
design to achieve better output power and bottom noise control than single DAC.
ES 9219 C is a new generation of decoding chip owned by ESS, with good power consumption control and
excellent measured indicators. Based on double materials, we give full play to the advantages
of ES 9219 C to ensure outstanding sound performance.