indoor use GSM 900MHZ cell phone Signal repeater LED screen Gain 65db outdoor magnetic base Antenna Whip | Мобильные телефоны и

indoor use GSM 900MHZ cell phone Signal repeater LED screen Gain 65db outdoor magnetic base Antenna Whip | Мобильные телефоны и

If you don't konw how to choose, please ask me online 
Skype:bettyzling

Viber/Whatsapp: +8618012353378 

GSM 900MHZ Mobile Signal Repeater

   Model No

SR5040

Parameter data

Uplink

Downlink

Frequency Range   

GSM

890-915 MHz

935-960MHz

Output Power          

17 ±2dBm

17±2dBm

Gain                            

65 ±2 dB

65±2dB

Bandwidth                      

60M

Ripple in Band            

PCS≤5dB

Spurious Emission          

9KHz~1GHz

≤ -36 dBm

1GHz~12.75GHz

≤ -30 dBm

VSWR                              

≤3

MTBF

>50000 hours

Power Supply                    

AC:100~240V, 50/ 60Hz;DC:9V 2A

Power Consumption      

< 5W

Impedance                    

50 ohm

Mechanical Specification

RF Connector            

N-Female N

Dimensions (D*W*H )        

198*186*20 (mm)

Net weight                          

1.2Kg

Installation Type              

Wall Installation

Environment Conditions  

IP40

Humidity                          

< 90%

Operating Temperature        

-10°C ~ 55°C

Packing list:

1. GSM signal booster main body

2. 5dB Omni-directional magnetic base Antenna with cable

3. 3dB whip antenna

4. mounting accessories

5. AC power supply

6. user manual

Whole Package Weight

1.65KG

Whole Package Size

310x200x110mm(L x W x D)

Why we need mobile signal repeater/ booster/ amplifier :

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.

Unfortunately, there are still some places where one can find themselves “out of coverage”. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

· Parking lots, tunnels

· Big stores, office buildings

· Cars, boats etc.

· House in remote areas etc

How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?

 •The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone 

amplifier through the connection cable (coax).

•After the signal is accepted by the phone amplifier, the device amplifies it.

•Then this amplified signal goes through the connection cable (coax) to the inside antenna.

•And after that, the amplified signal transmits to the cell phone.

Features of mobile phone signal repeater

A.  High-gain linear power amplifier

B .  ALC and AGC function technology ,

C.  Ultra-low noise receive amplifier

D.  There is no interference to the base station ,right after the opening of the original system and the base station without the need to adjust parameters ,

E.  Stable and reliable electromagnetic compatibility design .

F.  The base station dose not cause an increase in background noise ,but will not lead to a decline in the  quality of the base station communications

G.  With full-duplex communication mode .

H.  dispel the heat effective reasonable ,the structure is pretty ,the volume is suitable .

Signal repeater Installation diagram (very convenient and easy to install)

 How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

step 4: Mount your indoor antenna with signal repeater

step5:  Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

Frequently Asked Questions

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.