Wireless Mach3 Controller handlewheel USB 3axis 4axis for CNC engraving milling machine | Инструменты

Wireless Mach3 Controller handlewheel USB 3axis 4axis for CNC engraving milling machine | Инструменты

Specification:

1.The RF is Standard with 2.4G ISM ,the Tx power is 0DB and the RX sensitivity is -98DB.

2.The transmission distance is further than 15 meters with no barrier

3.The RF has 64 channels,the channel gap is 1Mhz

4.The protocol Designed with high performance

5.To jump frequency Adaptively when noised ,which can work with 2.4G wireless Mic ,Wlan and Bluetooth etc. devices.

6.32 sets Wireless Handle work fine at the same time in one room ,with no-interference each other

Description :

Condition: Brand New

It can work for Mach 3 use

It max support 4 axis. The 4th axis- A axis, no A=0 function (A axis functions are not as much as the other 3 axis)

All the buttons can be programmable

About the hand wheel, you move slowly, the machine runs slow; also you move fast, the machine runs fast.

Rich real-time display of large screen LCD:

Display machine status, run, pause, idle, step value

Display X Y Z axis workplace coordinate and x y z axis machine coordinate

Show the feed rate spindle speed

Band switch for easy operation:

Switching X-axis coordinate regulation

Switching Y-axis coordinate regulation

Switching Z-axis coordinate regulation

Switch hand wheel guide

Feed adjustment switch

Speed control switch

Package included:

1 X Main Unit

1 X User Manual

Wireless handlewheel

Wired handlewheel