FEORLO 1.5m 2.0mm CP-2015 Solder Wick Remover Desoldering Braid Sucker Flux Cable Wire Accessory | Инструменты

FEORLO 1.5m 2.0mm CP-2015 Solder Wick Remover Desoldering Braid Solder Remover Sucker Flux Wick Cable Wire  Accessory

Product Introduction

TypeCABLELength

20152.0mm x 1.5mBraided Coper Wire Desoldering WickSaturated With Wash-Free RMA FluxWARNINGOnly touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.CAUTIONDo not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.HOW TO USE1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.2. Remove the desoldering wick after the solder has been absorbed.3. Cut off the used section of the wick using nippers.4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.Photo Show